Yorkville PA: Powered Mixer & Speakers
$150.00
North of CR466
Lightly used Yorkville PA system in very good condition. Four channel mixer is 150 watts and has 1/4″, XLR and RCA inputs. Speakers are 12″ plus a horn. They include 1-3/8″ mount holes for speaker stands (not included). Also included are two brand new 25′ speaker cables.
Please contact 860-833-8415
MM4
Legacy 150w, 4 inputs Mixer/Amp
The MM4 four channel powered mixer provides clean, basic, simple operation with 150W @ 4ohms. Input jacks include XLR, 1/4″ phone and RCA. Global 3-band EQ is provided for easy set up. It’s all you need for a basic P.A. system. (Rackmount version: MM4R).
Features
Specifications
Number of Channels 4
Mono Channel EQ NA
Stereo Channel EQ N/A
Monitors Effects N/A
Inputs – XLR (bal) Ch. 1 – 4
Inputs – 1/4″ Ch. 1 – 2
Inputs – RCA (unbal) 2 Pairs
Clip / Mute LED Master Section
Phantom Power NA
Effects Send Yes
Effects Return Yes
Effects Return to Main Yes
Effects Return to Monitor N/A
Max Gain to Line Out -Mic Input (dB) 55
Max Gain to Line Out -Line Input (dB) 40
Master EQ -1 (type/Channels/Range -dB) Lo, Mid, High
Outputs – Amp A – 1/4″ Jacks 2
Mixer – Signal to Noise Ratio (dB) 90
Mixer – Freq Resp (Tone and EQ Flat,?2dB) 20 Hz – 20,000 Hz
Mixer- Input Ref Noise to line out @150 Ohms(dBv) -117
Mixer THD (Main out w/ -10dB input) less than 0.05%
Amp A-Power Output@8 Ohms (0.1 PER THD 1kHz) 85
Amp A – Power Output @ 4 Ohms 150
THD – 1kHz (dB) less than 0.05%
THD – 20Hz-20kHz (dB) less than 0.1%
Hum and Noise (un / Aweight -dB) -96
Typical crosstalk -1 kHz (dB- less than -60
Input Impedance – Bal/Unbal (Ohms) 2200/10K
Input Sesitivity (Vrms Sine) 1.4 V
CMRR @ 60Hz (min/typ) 54 dB / 66 dB
Max Votage Gain (dB) 25
Power Consumption (typ/max) 110 VA / 320 VA
Protection Thermal / Load / DC
Cooling Passive Heat Sink
Transformer Type El Core
Finish Blue/Black Carpet, Scratch Resistant Front Panel
Chassis Construction Heavey Gauge Metal with Plywood Cabinet
Rackmount MM4R (2U)
Dimensions (DWH, inches) 11 x 21 x 5.9
Dimensions (DWH, cm) 28 x 53 x 15
Weight (lbs/kg) 25 / 11.5
Y112
Legacy 150w, 12-inch / 1-inch Speaker
Features
Specifications
System Type 2-Way
Active or Passive Passive
Power Rating (Watts) 150
Nominal Impedance (Ohms) 8
Sensitivity (dB @1Watt/1m) 100
Max SPL (dB) 121
Frequency Response (Hz +/- 3dB) 75 – 16,000
Crossover Frequency (Hz) 6000
Driver Configuration 1 inch, 12 inch
HF Driver(s) Tweeter
LF Driver(s) 12
Inputs 2
Inputs – 1/4″ Jacks 2
Corners Black Metal
Feet Plastic Glides
Strap Handles 1x side mounted
Pole Mount Adapter (1 3/8″-3.5cm) Yes
Enclosure Materials 1/2 inch 5-ply plywood
Grille Heavy gauge black perforated metal
Covering / Finish Blue/Black Carpet
Dimensions (DWH xbackW, inches) 13 x 16 x 19.5 x 9.5
Dimensions (DWH xbackW, cm) 33 x 41 x 50 x 24
Weight (lbs/kg) 22.9 / 10.4